© Microhard Systems Inc.
27
4.0 Configuration
System Syslog Server IP
The IPnXGii can report system level events to a third party Syslog server,
which can be used to monitor events reported by the IPnXGii.
IP Address
0.0.0.0
System Syslog Server Port
Enter the UDP listening port of the Syslog Server. The default port number
is generally 514, but could vary from Server to Server.
UDP Port
514
Time Settings
The IPnXGii can be set to use a local time source, thus keeping time on its own, or it can be configured to
synchronize the date and time via a NTP Server. The options and menus available will change depending
on the current setting of the Date and Time Setting Mode, as seen below.
Image 4-1-3: System Settings > Time Settings
Network Time Protocol (NTP)
can be used to synchronize the
time and date or computer
systems with a centralized,
referenced server. This can
help ensure all systems on a
network have the same time
and date.
Date and Time Setting Mode
Select the Date and Time Setting Mode required. If set for ‘Use
Local Time’ the unit will keep its own time and not attempt to
synchronize with a network server. If ‘Synchronize Date And
Time Over Network’ is selected, a NTP server can be defined.
Values (selection)
Use Local Time Source
Synchronize Date And Time
Over Network
Date
The calendar date may be entered in this field. Note that the
entered value is lost should the IPnXGii lose power for some
reason.
Values
(yyyy-mm-dd)
2011.04.01
(varies)
