Microcom 438TM, Operator'S Manual

Page: 224 / 231

13-18 438TM Operator’s Manual - 880049-0113
X 157 Takeup Motor Run Time: Only used with custom Takeup PIC code. The
value for X represents how long the takeup motor will run, in milliseconds,
after printing has stopped.
0 0
1 25 25 msec
2 50
3 75
4 100
5 125
6 150
7 175
8 200
9 225
10 250
11 275
12 300
13 325
14 350
15 375
16 400
17 425
18 450
19 475
20 500
21 525
22 550
23 575
24 600
25 625
X 158 Set the Transmissive Dot2Gap Value: This is the distance of the
transmissive sensor, that detects diecut and blow hole registration marks, to
the dot row.
187 238 and 338 Series 203dpi
276 238 and 338 Series 300dpi
468 438 203pi
730 438 300dpi
264 438T Series 203dpi
395 438T Series 300dpi
X
159 Brownout Reporting: Reports the number of recorded brownout conditions.
0 After a power up, reports the “running” total of detected Brownouts.
1 Clears the “running” total or volatile brownout count
5 Reports the non-volatile brownout count stored in memory
255 Clears the non-volatile brownout count stored in memory
^A ^D COMMAND