Microcom 438TM, Operator'S Manual

Page: 217 / 231

438TM Operator’s Manual - 880049-0113 13-11
3 Enable 1 and 2
^A ^D COMMAND
XX 64 Auto-Print String Count: The ^Axx instructs the printer how many text strings
to accept before printing.
XX 66 Clear Single FORMAT Stored in RAM: The ^Axx specifies which memory
slot to clear (1-128).
70 Clear Commands 73 through 76
XX
73 Load Copies Count: Instructs the printer to print a group of labels. This
command will not increment/decrement serial numbers.
X
74 Infinity Print: Continues to print copies of a format until the power is shut off.
The valid ^Ax values are “1” to enable and “0” to disable this command.
XX 75 Load Label Count: Instructs the printer to print a batch of labels using the
serial number functions if enabled.
XX 76 Load Delay Time Between Labels: The ^Axx specifies the delay time in
1/10ths of a second. Maximum value is 650.
77 Load PDF-417 Bar Code Data
X
78 Set print head number of dots.
448 203dpi 238M (448 dots)
672 300dpi 238M (640 dots)
640 203dpi 338M (640 dots)
960 300dpi 338M (960 dots)
832 203dpi 438 (832 dots)
1280 300dpi 438 (1280 dots)
832 203dpi 438M (832 dots)
1280 300dpi 438M (1280 dots)
X
79 Set print head dots/inch (dpi). This command sets the dot density of the
print head. This command MUST be sent BEFORE the # of Dots is set with
the ^D78 command.
0 203 DPI
1 300 DPI
80 Clears Command 86, 88, and 89
81 Disable Serial Number Function: This command disables the serial number
function for either single or multiple serial numbers.
XX 84 Load Text String Number to Increment/Decrement: Instructs the printer
which text string to increment/decrement. Only used in conjunction with single
serial numbers.