Microcom 428LT, Operator'S Manual

Page: 195 / 210

12-12 428LT Operator’s Manual - 880040-0200
^A ^D COMMAND
X 78 Set print head number of dots.
448 203dpi 224 (448 dots)
640 300dpi 224 (640 dots)
640 203dpi 324M (640 dots)
960 300dpi 324M (960 dots)
832 203dpi 424 (832 dots)
1280 300dpi 424 (1280 dots)
832 203dpi 424M (832 dots)
1280 300dpi 424M (1280 dots)
832 203dpi X28 (832 dots)
1280 300dpi X28 (1280 dots)
X
79 Set print head dots/inch (dpi). This command sets the dot density of the
print head. This command MUST be sent BEFORE the # of Dots is set with
the ^D78 command.
0 203 DPI
1 300 DPI
80 Clears Command 86, 88, and 89
81 Disable Serial Number Function: This command disables the serial number
function for either single or multiple serial numbers.
XX 84 Load Text String Number to Increment/Decrement: Instructs the printer
which text string to increment/decrement. Only used in conjunction with single
serial numbers.
XX 85 Load Increment/Decrement Step Value: The ^Axx specifies the value that
the serial number will be incremented or decremented.
X 86 Single Serial Number Status:
0 Disable Increment/Decrement
1 Enable Increment. The serial number will be increased by the ^D85 value.
2
86 Enable Decrement. The serial number will be decreased by the ^D85 value.
XX 87 Load Field Number to Clear Increment/Decrement Status: Clears the
status of one or more serial numbers.
XX 88 Load Field Number to Increment by 1: The ^Axx specifies which field to
increment when using the multiple serial number function.
XX 89 Load Field Number to Decrement by 1: The ^Axx specifies which field to
decrement when using the multiple serial number function.
XX
90 Reflective Detection Sensitivity: The ^Axx value sets the point (0-255) at
which the printer detects a blackline registration mark using the reflective
sensor. The printer’s threshold default is a value of 100 for the reflective