Microcom 428LT, Operator'S Manual

Page: 100 / 210

Chapter 5 Printer Commands
428LT Operator’s Manual - 880040-0200 5-57
^A ^D Command
X 157 Takeup Motor Run Time:
The D157 command is used with optional software that controls a DC Takeup
motor instead of a cutter motor. The value for X represents how long the
takeup motor will run, in milliseconds, after printing has stopped. This
command is a volatile command with a default of 0. The ^A1^D145 command
lists the current setting under the Post Takeup Time.
0 0
1 25 25 msec
2 50
3 75
4 100
5 125
6 150
7 175
8 200
9 225
10 250
11 275
12 300
13 325
14 350
15 375
16 400
17 425
18 450
19 475
20 500
21 525
22 550
23 575
24 600
25 625
X 158 Set the Dot2Gap Value:
This is the distance of the transmissive sensor, that detects diecut and blow
hole registration marks, to the dot row. This distance is set at the factory and
is typically not needed to be changed. The Dot2gap distances represent the
physical characteristics of the printer models. This command is used in
conjunction with the Finish Mode feature; see the D27 command bit position 8
for more information.