Page 13
Operation Using Ethernet
eddyNCDT 306x / 307x
Direct connection to PC
Network
PC with static IP
PC with DHCP
Controller with dynamic IP, PC with DHCP
Connect the controller to a PC via a direct Ethernet connection
(LAN).
Connect the controller to a switch.
Start the SensorFinder.exe
program.
Click the button
. Select the
designated controller from the
list. In order to change the ad-
dress settings, click the button
Change IP...
.
• Address type: static IP-Address
• IP address: 169.254.168.150
1
• Subnet mask: 255.255.0.0
Click the button
Apply
, to
transmit the changes to the
controller.
Click the button
Open
Web-
Page
to connect the controller
with your default browser.
1) Requires that the LAN connec-
tion on the PC uses, for examp-
le, the following IP address:
169.254.168.1.
Wait until Windows has
established a network con-
nection (connection with
limited connectivity).
Start the
SensorFinder.exe
program.
Click the button
.
Select the designated
controller from the list.
Click the button
Open
WebPage
to connect
the controller with your
default browser.
Enter the controller in the DHCP / register
the controller in your IT department.
The controller gets assigned an IP address from
your DHCP server. You can check this IP address
with the SensorFinder.exe program.
Start the SensorFinder.exe program.
Click the button
. Select the designated
controller from the list.
Click the button
Open
WebPage
to connect
the controller with your default browser.
Alternatively: If DHCP is used and the DHCP
server is linked to the DNS server, access to
the controller via a host name of the structure
„DT3060_<serial number>“ is possible.
Start a web browser on your PC. Type
„DT3060_<serial number>“the address bar
of your web browser.
Interactive websites for programming the controller and peripherals now appear in the web browser.
