MICRO-EPSILON eddyNCDT 3060 Quick Manual Download Page 21

Page: 21 / 24

Page 21

Distance Measurements

eddyNCDT 306x / 307x

Positioning the Target

Position the target within the sensor measuring

range.

The value for the start of the measuring range (SMR)

depends on the sensor. This value can be found in the

technical data of the sensor.

SMR

Sensor

20 mA

12 mA

4 mA

Target

Measuring range (MR)

SMR MMR EMR

Displace-
ment

10 V

5 V

0 V

Signal

SMR Start of measuring range

MMR Midrange

EMR End of measuring range

Distance Measurements

Switch to the

Measurement

menu.

Click the

Start measuring

button.

Statistic values are calculated in the web interface. Click-

ing onto the

start/stop measuring

button starts/

stops the calculation. At the beginning of a measure-

ment, the statistic values are reset. During a measure-

ment, the statistic values are updated with each new

data package received by the controller.

Summary of Contents for eddyNCDT 3060

























Search results

Summary of Contents for eddyNCDT 3060

Reviews:

Related manuals for eddyNCDT 3060

Brands by name

Popular brands

MICRO-EPSILON eddyNCDT 3060, Quick Manual

Search results

Summary of Contents for eddyNCDT 3060

Reviews:

Related manuals for eddyNCDT 3060

Brands by name

Popular brands