manualshive.com logo in svg

MICRO-EPSILON eddyNCDT 3060, Quick Manual

Share
Download
MICRO-EPSILON eddyNCDT 3060 Quick Manual Download Page 3

Page 3

General

eddyNCDT 306x / 307x

General

Symbols used

The following symbols are used in this document:

Indicates a hazardous situation which, if not avoided, may result in minor or 

moderate injury.
Indicates a situation that may result in property damage if not avoided.

Indicates a user action.

i

Indicates a tip for users.

Measure

Indicates hardware or a software button/menu.
Sensor measurement direction

Warnings

Connect the power supply and the display/output device according to the safety regulations for 

electrical equipment.

 

> Risk of injury, damage to or destruction of the sensor and/or the controllers
Avoid shocks and impacts to the sensor and the controller.

 

> Damage to or destruction of the sensor and/or the controller
The supply voltage must not exceed the specified limits.

 

> Damage to or destruction of the sensor and/or the controller
Protect the sensor cable against damage.

 

> Destruction of the sensor, failure of the measurement system.

Summary of Contents for eddyNCDT 3060

























Reviews:

No comments

Brands by name

Popular brands

Load more brands