Page 14
Operation Using Ethernet
eddyNCDT 306x / 307x
Access via Web Interface
Interactive website after selection of the web interface
Additional help functions (e.g.
Settings
) are available
in the top navigation bar. All settings on the web page
are implemented in the controller immediately.
Parallel operation with web browser and Telnet com-
mands is possible; the last setting applies.
The appearance of the web pages can change depend-
ing on the functions and the peripherals. Each page
contains parameter descriptions and thus tips for config-
uring the controller.
Operating Menu, Setting Controller Parameters
You can program eddyNCDT 306x, 307x using two dif-
ferent methods simultaneously:
- using the web browser via the sensor web interface
- using the ASCII command set and the terminal pro-
gram via Ethernet (Telnet).
Login, Change of the User Level
Menu
Settings
>
System settings
.
Assigning passwords and the User level prevent unau-
thorized changes to controller settings.
In delivery state, no password is deposited in the
controller. After the controller has been configured, you
should enable password protection.
i
A firmware update will not change a custom pass-
word.
The following functions are accessible for the user:
User
Professional
Password required
no
yes
View settings
yes
yes
Change settings,
linearization, analog output,
password
no
yes
Start measuring
yes
yes
Scaling diagrams
yes
yes
Permissions within the user hierarchy
