Page 12
Installation and Assembly
eddyNCDT 306x / 307x
Controller
105 (4.13)
38 (1.50)
127 (5.00)
19.2
(.76)
27 (1.06)
17.5
(.69)
65
(2.60)
36.6 (1.44)
Mounting
holes
54
(2.13)
ø4.2 (.16)
Dimensional drawing controller
Operation Using Ethernet
The controller generates dynamic web pages, that con-
tain the current settings of the controller and the periph-
erals. The operation is only possible as long as there is
an Ethernet connection to the controller.
Requirements
You need a web browser that supports HTML5 (e. g.
Firefox ≥ 3.5 or Internet Explorer ≥ 10) on a PC with a
network connection.
Use a LAN cable with M12 screw connection and RJ-
45 connector, e.g. as SCD2/4/RJ45 cable available as
optional accessory.
The controller is factory-set to direct connection with
a static IP address to facilitate initial operation of the
control.
If your browser is set to access the Internet via a proxy
server, please add the controller IP address to the IP
addresses in the browser settings, which are not to be
routed over the proxy server. The MAC address of the
measuring device is given on the controller rating plate.
“Javascript” and “CSS” must be enabled in the browser
so that measurement results can be displayed graphi-
cally.
