Functional Principle, Technical Data
capaNCDT 6500
Page 11
2.2.7 DD6500 Display Board with Ethernet Interface
The display board DD6500 serves to display and output of signal. The measuring val-
ues can be read in percent of all eight channels on display. The analog output signals
(voltage and current output) the trigger input and the synchronization input/output are
located on the 37-pol-Sub-D connector. The system can be connected to a network
through a Ethernet interface and the measuring values can be read out digital, see Chap.
6.
- Ethernet Interface. In addition, the display board contains an EtherCAT interface for
transmission of the measured values in real time.
Fig. 8 Display board
2.2.8 Demodulator
Demodulation, linearization and amplifying of the distance-dependent measuring signal
are tasks of the demodulation-unit. The three trim-pots allow a
-
Linearity
-
Gain
-
Zero
adjustment of measuring system, see Chap.
5.3
, see Chap.
5.4
.
Fig. 9 Demodulator board DL 6510
Summary of Contents for capaNCDT 6500
Page 67: ......
