Safety
capaNCDT 6500
Page 5
1.
Safety
System operation assumes knowledge of the operating instructions.
1.1
Symbols Used
The following symbols are used in these operating instructions:
CAUTION
Indicates a hazardous situation which, if not avoided, may result
in minor or moderate injuries.
NOTICE
Indicates a situation that may result in property damage if not
avoided.
Indicates a user action.
i
Indicates a tip for users.
Measure
Indicates hardware or a software button/menu.
1.2
Warnings
Disconnect the power supply before touching the sensor surface.
> Danger of injury through static discharge
The power supply and the display/output device must be connected in accordance with
the safety regulations for electrical equipment.
> Risk of injury
> Damage to or destruction of the sensor and/or controller
Avoid shocks and impacts the sensor and controller.
> Damage to or destruction of the sensor and/or controller
Protect the cable against damage.
> Failure of the measuring device
Do not plug or unplug the board (Europe size) during the operation.
> Damage to or destruction of the board in the controller
1.3
Notes on CE Marking
The following apply to the measuring system:
-
EU directive 2014/30/EU
-
EU directive 2014/35/EU
-
EU directive 2011/65/EU, “RoHS“ category 9
Products which carry the CE mark satisfy the requirements of the EU directives cited and
the European harmonized standards (EN) listed therein. The EU Declaration of Conformi-
ty is available to the responsible authorities according to EU Directive, article 10, at:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
The measuring system is designed for use in industrial environments and meets the
requirements.
CAUTION
NOTICE
Summary of Contents for capaNCDT 6500
Page 67: ......
