MICRO-EPSILON capaNCDT 6500, Instruction Manual

Page: 12 / 68

capaNCDT 6500 Page 12
Functional Principle, Technical Data
2.3 Technical Data
Controller type DT6530
DL6530
DL6510 with CP6001
DT6530
DL6510 mit CPM6011
Resolution, static (2.6 Hz) 0.000075 % FSO 0.0006 % FSO
Resolution,
dynamic
(100 Hz) 0.0003 % FSO 0.0025 % FSO
(1 kHz) 0.0009 % FSO 0.007 % FSO
(8.5 kHz) 0.002 % FSO 0.015 % FSO
Limit frequency analog output 20 Hz; 1 kHz; 8.5 kHz (-3 dB, adjustable)
Data rate output
Ethernet
3.9 kSa/s
7.8 kSa/s (max. 4 channels)
EtherCAT 2.0 kSa/s
Linearity (typical) ±0.025 % FSO ±0.05 % FSO
Maximum sensitivity deviation ±0.05 % FSO ±0.1 % FSO
Repeatability
1
0.0003 % FSO 0.001 % FSO
Long time stability ±0.002 % FSO / month ±0.02 % FSO / month
Synchronous operation
2
yes yes
Insulator measurement yes no
Temperature stability
digital: 5 ppm/°C
analog: 10 ppm/°C
80 ppm
(digital and analog)
Operating temperature, sensor -50 ... +200 °C (-58 ... +392 °F)
Operating temperature,
controller
+10 ... +60 °C (+50 ...+140 °F)
Storage temperature -10 ... +75 °C (+14 ... +167 °F)
Power supply
100 ... 240 VAC (50 ... 60 Hz)
optional: 18 ... 36 VDC
Output
0 ... 10 V (max. 10 mA, short circuit proof);
offset
≤
±10 V up to 0 V
4 ... 20 mA (max. load 500 Ohm)
optional: 0 ... 20 mA (max. load 500 Ohm)
Ethernet 24 bit / EtherCAT 24 bit
Sensors all sensors are suitable
Sensor cable length, standard
CCm1.4x
CCg2.0x
Sensor cable length, matched
≤ 4.2 m (type CCmx)
≤ 8.0 m (type CCgx)
≤ 2.8 m (type CCmx)
≤ 4 m (type CCgx)
Trigger TTL, 5 V
Humidity 5 ... 95 % (non-condensing)
Protection class IP 40 (controller and sensors)
FSO = Full Scale Output
1) at constant ambient temperature (including temperature and air humidity)
2) Possible to further Controller DT6530 resp. DT6530C