background image

KSZ8463_eval_bd_user_guide_1.1.docx 
 

Micrel, Inc.  

 

July 17, 2013 

Confidential 

 

Rev. 1.1 

16/16

 

5  Reference Documents 

 
KSZ8463ML/RL Datasheet (Contact Micrel for latest Datasheet) 
KSZ8463ML/RL Evaluation Board Schematic (Contact Micrel for latest Schematic) 
KSZ8463ML/RL Evaluation Board Gerber files 
IEEE802.3 Specification 
RMII Specification by RMII Consortium 
KSZ8463ML Evaluation Kit User Guide 
 
 

6  Revision History  

 

 

 
 
 
 
 
 
 
 
 
 
 

© Micrel, Inc. 2013 

All rights reserved 

 

Micrel is a registered trademark of Micrel and its subsidiaries in the United States and certain other countries.  All other trademarks 
are the property of their respective owners. 

 

 
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility 
is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without 
notification to the customer. Micrel Products are not designed or authorized for use as components in life support 
appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. 
Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) 
support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the 
user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at 
Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale.  

 

Revision

 

Date

 

Summary of Changes

 

1.00 

06/16/11  

- Initial Release 

1.01 

08/30/11  

- Removed eval kit information 

1.02 

09/19/11 

- Updated text.  
- Added new board Figure 1. 

1.03 

09/23/11 

- Changed MLLRLL to MLI/RLI, MLL to MLI, RLL to RLI 

1.1 

7/17/13 

- Changed MLI/RLI to ML/RL, MLI to ML, RLI to RL 
- Added FML and FRL device suffixes 
- General overhaul 

Summary of Contents for KSZ8463ML

















Reviews: