Micrel Confidential
6
June 2006
2180 Fortune Drive, San Jose, CA 95131, USA
•
(408) 944-0800
•
http://www.micrel.com
KSZ8862-16 MQL Demo Board User’s Manual
4.1
Host Computer Requirements
The minimum PC requirement for running the software and the Demo Board is an USB
port, serial RS232 port and Microsoft Windows 98, ME, 2000, or XP.
4.2
Demo Board
The Demo Board provides an evaluation and development environment for KSZ886X-16
MQL Ethernet switch or MAC controller with a 16-bit host bus interface. It has push
button switches, LED’s and LCD for user interfaces. One 10/100Base-TX fast Ethernet
port and one 10Base-FL/100Base-SX port are available for different modes of Ethernet
connection.
4.3
ICD In-Circuit Debugger (RTA-FoUSB-MON)
Micrel has programmed the OpenTCP device driver into the Demo Board for
demonstration purposes, so the user can use the Demo Board to run demo software
“
TCP_GUI
” or “
LinkMD
” on the Demo Board.
If you want to use the Demo Board as a development platform and program the flash in
the M16C Microcomputer, you need to order the part RTA-FoUSB-MON from Renesas
or its distributors. The part can perform debugging and programming of the Demo Board
by using the host computer’s Universal Serial Bus (USB). The Demo Board will provide
power to the RTA-FoUSB-MON. When connecting the ICD to the Demo Board ensures
that the power source switch on the RTA-FoUSB-MON is in the “
TARGET
” position. If
the switch is left at “USB” Powered Mode, some MCU pins may be driver to undesirable
levels.
4.4
Software Development Tools
For details of the software development tools and programs, please refer to “Micrel
KSZ886X 16-Bit BSP User’s Manual”.
