NetRunner WAN User’s Manual
Messages
B-11
Table B-1. Screen Display Messages (continued)
Message
Explanation
Message Type
NOT ALLOWED
Event
An invalid mode of operation has been
entered; it will not be supported.
NOT CONNECTED
Info
The link reported is not connected. If the link is
frame relay, the DLCI reported is not
connected.
NOT INTERCONNECT LINK
Info
You are attempting to attach a primary link to a
secondary link and the primary link you have
selected is not an interconnect link.
NOT SUPPORTED
Info
Requested voice or fax configuration
parameter selected is not supported by your
voice module.
NUMERIC REQUIRED
Info
You must enter a numeric character, try again.
OPERATIONAL PROCESSOR
PASS
Event
Self test complete.
ni li
OUT OF CAS FRAME
Alarm
The multiframe alignment signal has been lost
on
li
. The two sides cannot sync up; check
your configuration.
ni li
OUT OF CAS FRAME
CLEARED
Alarm
The out-of-CAS-frame condition has cleared
on
li
.
ni li
OUT OF CRC FRAME
Alarm
The remote side is not receiving what it
expected on
li
. The CRC multiframe alignment
is wrong.
ni li
OUT OF CRC FRAME
CLEARED
Alarm
The out-of-CRC-frame condition has cleared
on
li
.
OUT OF RANGE
Info
Range of numbers entered is not available in
the unit.
OUTPUT DATA TEST
COMPLETE
Diag
Async channel output test is complete.
PRESS BREAK TO
TERMINATE TEST
Diag
To terminate a channel loopback, or channel
output test, press the
<break>
key.
PRIMARY MUST BE
DEASSIGNED
Info
You are attempting to attach a secondary
interconnect link to a link that is already
assigned as primary to another interconnect
link.
QUEUE
n/c cl
Event
Port
c
of node
n
has been placed in a first
come, first serve queue for the next available
port in the class.
ni
(
li
or
ds
) RED ALARM
Alarm
The T1 or E1 line is not operational. Indicates
that an out-of-frame condition existed for the
last 100 milliseconds or longer.
