Data Channels and Switching Configuration
NetRunner W
AN User’s Manual
5-14
Copy Channel Parameters
By using the copy channels selection you may configure a single port or range
of sync, async or voice/fax ports. This option can save you time if the ports
you are configuring match (or closely resemble) a port you have already
configured. You may copy parameters within the unit or to a locally
connected MICOM mux; you cannot copy to another Integration unit.
Note:
Source and destination ports must be a like kind (async to async, sync to sync)
and protocol (sync DLC to DLC). If they are not, an error message will display
and you must start again.
ENTER NODE ID/CHANNEL (OR RANGE OF CHANNELS) (^X TO ABORT):
NODE_A/B2
COMMAND FACILITY MAIN MENU
CONFIGURE LOCAL NODES
3
CONFIGURE LOCAL NODES
COPY CHANNEL PARAMETERS
ENTER SOURCE NODE ID/CHANNEL # (^X TO ABORT):
NODE_A/B1
Enter your source
channel number.
Enter your destination
(either a single port or
a range of ports).
You can now return to the channel configuration menu and modify specific
parameters if necessary. You should verify the configuration. Refer to View
Configuration, page 78.