B-1
Messages
B
The messages contained in this appendix include those messages received
from the optional modules.
Page
Screen Display Messages
B2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LCD/Keypad Messages
B16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note:
The STADIA Integration Hub does not offer an LCD Keypad.
Message Type:
Alarm
Vital to the system's operation; may cause an interruption
to that operation.
Event
Occurs in the regular operation of the system; most likely
will not affect the system's operation.
Dialog
Configurable async user messages.
Diag
Diagnostic messages.
Info
Informational.
Key:
VF
= Voice Frequency.
ADB = Automatic Dial Backup.
<>
= Brackets indicate configurable messages. Default is shown.
cl
= Class name, voice/fax extension number, or
MATRIX
(if matrix
switching is used).
ci
= Channel (port) number. In the case of frame relay ports, the port
number is followed by a decimal point and the fourdigit number of
the local DLCI (the DLCI attached to the local unit).
ds
= T1 Line interface either DS1 or DSX1
li
= E1 Line interface either L1 or L2
n/c
= Node ID (n)/channel number (c).
1
ni
= Node ID.
nn
= A variable amount.
ml
= Module location letter [B-E].
__________
1
In some cases the channel number will display the following:
CMD = Command Facility
PPP = NETMan connection
PPP
n
= One of the NETMan secondary channels (
n
could be 1-5)
