Link and Port Configuration
NetRunner W
AN User’s Manual
4-35
Resetting the DLCI
To set the newly configured parameters, you must reset the DLCI as shown.
RESET
LINK
COMMAND FACILITY MAIN MENU
RESET
FRAME RELAY LINK RESET
RESET A SPECIFIC DLCI
2
ENTER LINK CHANNEL # (^X TO ABORT):
A1
2
The Frame Relay Link Reset
menu will display only if the
port is configured as a frame
relay link.
10
ENTER DLCI TO RESET (^X TO ABORT):
List DLCI
For the frame relay link, you may wish to view a list of the DLCIs and their
state (configured, reported, and active). Follow this path:
CONFIGURE LOCAL NODES
FRAME RELAY LINK PARAMETERS
ENTER NODE–ID/CHANNEL # (^X TO ABORT):
FRAME RELAY PARAMETERS
DLCI CONFIGURATION
3
DLCI CONFIGURATION
LIST DLCI
4
101–VRA 103–V 114–R 115–VR 222–FRA
223–FRA
325–UR 727–TRA
8 DLCI’S ON FRAME RELAY LINK A01
V = DLCI configured as virtual link
F = DLCI configured for fragmentation
T = DLCI configured for transparent protocol
R = DLCI reported
A = DLCI active
U= DLCI unassigned
