Mhouse MhouseKit WS2S, Installation Instructions Manual

Page: 29 / 36

27
CE declaration of conformity
Declaration in accordance with Directives: 1999/5/CE (R&TTE), 2004/108/CE (EMC);
2006/42/CE (MD) Appendix II, part B
WS1SC, WS1SK, GTX4, PH100 and FL100 are produced by NICE S.p.a. (TV) I;
MHOUSE is a commercial trademark owned by Nice S.p.a.
Note: The contents of this declaration correspond to declarations in the official document deposited at the registered offices of
Nice S.p.a. and in particular to the last revision available before printing this manual. The text herein has been re-edited for edito-
rial purposes. A copy of the original declaration may be requested from Nice S.p.a. (TV) I.
Declaration number: 369/WS2S Revision: 1 Language: EN
Name of manufacturer: NICE s.p.a.
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Person authorized to provide
the technical documentation:
Mr. Oscar Marchetto
Product type: Electromechanical gearmotor and relative accessories
Model / Type : WS1SC, WS1SK, GTX4, PH100, FL100
Accessories:
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the products specified
above comply with the provisions of the following directives:
• WS1SC and GTX4 models conform to the Directive 1999/5/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of the 9th
March 1999 regarding radio equipment and telecommunications terminal equipment and the mutual recognition of their con-
formity, according to the following harmonised standards
- Health protection (art. 3(1)(a)): EN 50371:2002
- Electric safety (art. 3(1)(a)): EN 60950-1:2006+A11:2009
- Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002
- Radio spectrum (art. 3(2)): EN 300 220-2 V2.3.1:2010
In accordance with directive 1999/5/EC (annex V), the product GTX4 is classified as class 1 and marked:
• Models WS1SC, WS1SK, PH100 and FL100 conform to DIRECTIVE 2004/108/CE/108/EC OF THE EUROPEAN PARLIA-
MENT AND COUNCIL of 15th December 2004 regarding the approximation of member state legislation related to electromag-
netic compatibility, repealing directive 89/336/EEC, according to the following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
In addition the products WS1SC and WS1SK conform to the following directive according to the requirements for “partly com-
pleted machinery”:
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machinery, and amending
directive 95/16/EC (consolidated text)
• We hereby declare that the relevant technical documentation has been compiled in conformity with Annex VII B of directive 2006/42/EC and
that the following essential requirements have been satisfied:
1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the “partly
completed machinery”, without prejudice to intellectual property rights of the manufacturer..
• Should the “partly completed machinery” be put into service in a European country with an official language different from the one of this
declaration, the importer must attach the translation of this document to the declaration.
• The “partly completed machinery” must not be put into service until the final machinery into which it is to be incorporated has been declared
in conformity with the provisions of directive 2006/42/EC.
In addition the products WS1SC and WS1SK conform to the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008
EN 60335-2-103:2003
The products WS1SC and WS1SK conform, within the constraints of applicable parts, to the following standards:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 7 February 2012
Mr. Luigi Paro (Managing Director)
APPENDIX 1
0682