64
Removal (Optimus 2, model 2.322):
– Pull the headlight insert (A) toward the front out
of the housing (B).
– Turn the bayonet catch by about 15° counter-clock-
wise (2) and pull (3). – Keep hold of the headlight
insert in order to prevent it from turning along.
– Remove the defective bulb from the reflector.
Assembly (Optimus 2, model 2.322):
– Insert the new bulb into the reflector.
☞
Note:
Do not touch the halogen bulb with bare hands.
– Replace the bayonet catch into the headlight insert
and turn by about 15° clockwise (4).
– Push the headlight insert (A) with the joint pinion
(C) aligned horizontally into the housing(B) until it
locks into place (1).
ADJUSTING THE HEADLIGHTS
☞
Note:
The adjustment is to be done on both headlights. –
Therefore place the vehicle on level ground.
– Adjust the headlights by tilting the insert (5).
– The headlights are adjusted correctly when the low-
er edge of the cone of light reaches the ground
about 3 meters in front of the vehicle.
1
4
2
3
A
B
C
C
5
Summary of Contents for Optimus 2 2.322
Page 1: ...SERVICE MANUAL OPTIMUS 2 MODEL 2 322 TOURING 928 MODEL 9 928 GB We move people...
Page 2: ...2...
Page 74: ...74 NOTES...
Page 75: ...75 NOTES...
