Meyra Optimus 2 2.322, Service Manual

Page: 50 / 76

50
CONCLUDING THE ADJUSTMENT MODUS
In order to conclude the adjustment modus and switch
back into the driving modus the same keys are pressed
in the same sequence as when starting the adjustment
modus:
– (While the vehicle is switched on:) Press the right
and lower service key (2)+(3) simultaneously and
keep them pressed.
– Additionally press the left service-key (1) and release
it again. – This switches the wheelchair off.
– Then release all keys. – After the next activation the
display shows 0.0 KMH or < F H > after the initialisa-
tion phase as a signal that the adjustment modus
has been completed and you have switched to the
regular drive mode.
QUICK RESET TO STANDARD VALUES
It is possible to easily reset the values to the standard
manufacturers setting should you have lost track dur-
ing the adjustment.
Initial situation
The adjustment modus was activated and to adjust the
driving behaviour parameters the P1-P5-key was
pressed. This is evident through the lighting up of one
of the LEDs marked P1 to P5.
Measure
– For quick setting press the joystick-key (4). – The dis-
play shows the standard value and all driving pa-
rameters were reset to the standard manufacturers
setting. Now press the P1-P5-key (5).
– Now conclude the adjustment modus, view above
chapter < Concluding adjustment modus >. – After
the next activation the vehicle drives with the stand-
ard manufacturers setting of the driving parame-
ters.
1
2
3
5 4