Meyra Optimus 2 2.322, Service Manual

Page: 34 / 76

34
ADJUSTMENT MODULE
When applying electric adjustment units the vehicle is
equipped with an adjustment module < AM > (4) for
addressing the adjustment motors. – The adjustment
module is available in two different versions:
– AM1 for 4 adjustment drives (back support, tilting,
and two leg supports)
– AM1 for 6 adjustment drives (needed for additional
seat height adjustment)
The output current (0 to 10A) and the output voltage
(0 to 24 V) can be adjusted. – Further features are:
– Gentle motor initiation, operation via keys and/or
joystick(s)
– Green and red LEDs as a status indicator. During fault-
less function a green and red LED light up shortly
after one another when switching on the wheelchair.
PLUG ASSIGNMENT
XX End-switch (on two motor wheelchairs and on the adjustment motor 1 mounted to the
back: End-switch adjustment motor 4. On one motor wheelchairs: End-switch adjust-
ment motor 3)
X1 Switch (reserve)
X2 Locking switch adjustment motor 5 against adjustment motor 2
X3 Locking switch adjustment motor 2 against adjustment motor 5
X4 End-switch adjustment motor 4
Verst. 1 Adjustment motor 1 (electrically adjustable leg support left, code 86)
Verst. 2 Adjustment motor 2 (electrically adjustable leg support right, code 86)
Verst. 3 Adjustment motor 3 (electrically adjustable seat angle, code 118)
Verst. 4 Adjustment motor 4 (electrically adjustable back, code 25)
Bus Bus-cable
Only Adjustment module 2 (AM2)
Verst. 5 Adjustment motor 5, with end-switch (electrically adjustable seat height, code 27)
Aux optional outlet/AUX
X4
XX
X3 X2 X1 Verst.5 Bus
Bus Verst.4 Verst.3 Verst.2 Verst.1 Aux
4