25
1
ADJUSTING THE TRACK AND STRAIGHT COURSE
– Loosen the counter nuts (1) on both tie-rods left
and right.
– Switch the operating module on, put the joystick
into the straight forward direction and let the
wheelchair drive a short distance.
– Turn the tie rod until the correct toe-in is achieved,
view chapter
< checking the alignment >
.
☞
Note:
When turning the tie-rods, take care that the rub-
ber buffers (2) are not displaced.
– Adjust the straight course by corresponding turns
of both tie-rods.
– Retighten the counter nuts on both tie-rods left and
right.
– Check the straight track on a short ride and if re-
quired repeat the procedure.
☞
Note:
Let the wheelchair repeatedly start a little distance
during the adjustment since the friction between
the tyres and floor complicates the following of the
steering wheels.
2
Summary of Contents for Optimus 2 2.322
Page 1: ...SERVICE MANUAL OPTIMUS 2 MODEL 2 322 TOURING 928 MODEL 9 928 GB We move people...
Page 2: ...2...
Page 74: ...74 NOTES...
Page 75: ...75 NOTES...
