Meyra Optimus 2 2.322, Service Manual

Page: 16 / 76

16
MAGNETIC BRAKE
The magnetic brake (A) is flanged to the motor (B).
☞
Note:
Should the electro magnetic brake no longer hold
the max. permitted total weight safely on a slope of
28% / 15°, the brake must be replaced.
REMOVAL
Disconnect the connector cable to remove the defec-
tive electro magnetic brake. Afterward the three at-
tachment screws (C) must be dismantled.
– Therefore observe chapter < Replacement of the
drive unit >.
MOUNTING
Assembly of the electro magnetic brake is done ana-
logue in reverse order to the assembly.
!
Attention:
After assembly of the electro magnetic brake the
function of the drive/push operation must be ad-
justed again, hereto view chapter <
Adjustment
drive/push mode >.
A
B
C
C
C