Meyra 1.163, Service Manual

Page: 74 / 80

74
Maintenance checklist
Mechanic
Chassis
❑
Covers and revetments are free of dents and tears?
❑
Revetments are firmly screwed on or strapped tight with velcro at all designated attach-
ment points?
❑
Chassis complete and undamaged?
❑
Foot mats undamaged and laid out correctly?
Seat
❑
Seat bolt faultlessly locks into place in all positions?
❑
Adapter plate of the seat does not show any fissures or bends?
❑
Telescopic tube attached correctly (tightening torque according to table)?
❑
Armrests attached correctly (tightening torque according to table)?
Handle bar
❑
The steering column does not show slackness in any direction?
❑
Does the steering column locking device work flawlessly?
❑
Handgrips are undamaged and fit tightly?
Frame
❑
Locking device between front and rear chassis completely snaps into place?
❑
Frame parts do not show signs of deforming or breaches?
Chassis
❑
Screws with which the drive is attached to the vehicle tightened to the value in the ta-
ble?
Supplement chassis, only 3-wheel models
❑
Wheel fork not contorted or cracked?
Supplement chassis, only 4-wheel models
❑
Toe-in of the front wheels is 2 mm?
❑
Tie-rod without lag?
❑
Wear of the axle shank bushing: Are the axle shanks free of radial lag and run freely?
❑
Axle bolts tightened with the value indicated in the table?