Meyra 1.163, Service Manual

Page: 56 / 80

Driving parameter
The driving features of the vehicle are defined by
adjusting the single parameters. The following pa-
rameters can be changed with the programmer SP
1:
1. Forward Acceleration: Starting acceleration
in forward motion, adjustable from 0 % (or ma-
nufacturer minimum) to 100 % (manufacturer
maximum).
2. Forward Deceleration: Braking delay in for-
ward motion, adjustable from 0 % (or manuf-
acturer minimum) to 100 % (manufacturer ma-
ximum).
3. Reverse Acceleration:
Starting acceleration
in backward motion, adjustable from 0 % (or
manufacturer minimum) to 100 % (manufactu-
rer maximum).
4. Reverse Deceleration:
Braking delay in back-
ward motion, adjustable from 0 % (or manuf-
acturer minimum) to 100 % (manufacturer ma-
ximum).
5. Forward Speed: Maximum forward speed, ad-
justable from 0 % (or manufacturer minimum)
to 100 % (manufacturer maximum).
6. Reverse Speed: Maximum backward speed,
adjustable from 0 % (or manufacturer mini-
mum) to 100 % (manufacturer maximum).
7. Invert Throttle Polarity: This parameter re-
verses the driving direction.
– On vehicles with an accelerator lever, the set-
ting No corresponds to the manufacturer inten-
ded activation direction.
– The setting Yes reverses the activation direc-
tion.
8. Power Down Timer: With this parameter the
time period can be adjusted after which the
electronic is automatically powered down after
the vehicle comes
to a stillstand. The time span
for powering down can be adjusted from 0 to
20 minutes. On the setting "0 minutes" the au-
tomatic power down is deactivated.
For continuing the ride the vehicle has to be
switched off and on again.
56