Meyra 1.163, Service Manual

Page: 46 / 80

2
3
1
4
3
46
Operating keypad PCB
Model 2.364 and
Model 1.363 / 1.364:
Disassembly of the operating keypad PCB
1. On model 1.363 / 1.364 disassemble the front
and rear tiller revetment first.
☞
Therefore observe chapter < Steering column re-
vetment
>.
2. Disassemble the four attachment screws (1) of
the operating panel.
☞
Note:
Carefully lift the operating panel and swivel it to
the side [2]!
3. Pull the plug from the operating panel PCB.
4. Remove the screws (4) of the additional PCB and
remove it.
5. Unscrew the attachment nuts (3) and remove
the operating keypad PCB.
Assembly of the operating keypad PCB
Assembly of the operating keypad PCB is done ana-
logue in reverse order.
Additional PCB to the operating panel PCB
The additional PCB is mounted with two screws (4)
onto the operating panel PCB.