Meyra 1.163, Service Manual

Page: 22 / 80

2
1
3
5
4
6
22
Disassembly of the drive
☞
Note:
Before removal of the drive you should observe
the position of the motor for the subsequent as-
sembly.
with mounting jig:
1. First disassemble the upper screw (1) of the two
shock absorbers (2).
☞
For this you need to slightly compress the spring
of each shock absorber.
– Afterwards disassemble the lower screw (3) of
the two shock absorbers.
or
without mounting jig:
1. First disassemble the lower screw (3) of the two
shock absorbers.
☞
For this you need to slightly compress the spring
of each shock absorber.
2. Then dismantle the axle screw (4) on both sides
and pull off the respective wheel flange (5) (6).