Meyra 1.163, Service Manual

Page: 66 / 80

V1.41
8
1
9
7
4
5
6
2
3
66
Tiller menu
The following sub-menu can be selected through
the tiller menu:
(1)
Director zero zone
(2) Director position
(3) Director movement
(4) Selection of different directors
(5) Speed reduction
(6) Cruise control
(7) Curve speed
(8) Curve sensor
(9) Right / left operation
Tiller zero zone (director zero zone)
In the idle condition the acceleration lever must be
within the < Zero zone >.
The section < zero zone > spans from the positive
to the negative value of the set figure.
– The value of 7 in the < zero zone > from +7 to -7
is set by the manufacturer.
☞
The < zero zone > can be set larger, but not less
than 7.
☞
If the value of the director is larger than the set
value an error message is displayed < E13 >.
☞
From software version V1.41 the < zero zone >
is set by the manufacturer at a value of +10 to
-10.
Tiller position
Here the current electric position of the director is
displayed.
The possible sector spans from -127 to +127.
☞
In the still position a value of 0 (zero) ±7 (from
software version V1.41 ± 10) should be dis-
played.
☞
When the director is moved slowly, the value
must be adjustable from 0 – +127 (forward mo-
tion) and from 0 – -127 (backward motion).