Meyra 1.163, Service Manual

Page: 19 / 80

1
2
2
3
19
Assembly of the drive unit
Assembly of the drive is achieved in reverse order
to the disassembly.
1. Slide the attachment clamp with the damping
rubber (1) onto the square of the drive.
2. Insert the drive into the rear frame and align it.
– The magnetic brake is located in driving direc-
tion to the right.
☞
Note:
Watch for the correct assembly position of the
drive.
3. Mount the attachment clamps of the drive to
the rear frame.
4. Mount the joint connection of the hand venti-
lated pressure brake (magnetic brake) (2).
☞
Note:
In doing so the plastic washer (3) is placed be-
tween the tin of the hand ventilation and the
joint arm.
☞
Only tighten the safety nut so far, that the turn-
ability of the lever is not encumbered.
☞
Check the hand ventilation lever for easy func-
tioning. – If necessary loosen the safety nut ac-
cordingly.