Metso NORDBERG LT105, Instruction Manual

Page: 80 / 126

9-8
NORDBERG LT105/105S INSTRUCTION MANUAL 9-07-B 05/01
CHAPTER 9 - MAINTENANCE
9.9 LUBRICANT RECOMMENDATION
This section contains information and instructions
on several alternative and optional equipment.
Normally Lokotracks have only some of them.
Before maintaining and servicing, find out which
alternative and optional equipment your Lokotrack
has.
9.10 CRUSHER
See further instruction in your crusher manual.
9.11 FEEDER / SCREEN
See further instruction in your feeder/screen
manual.
9.12 TRACK GEAR
– Oil designation to DIN 51517, part 3: CLP
220.
– ISO viscosity to DIN 51519: ISO - VG
220.
– Kinematic viscosity at 40°C(104ÉF): Min.
198 mm2/s (cSt). Max. 242 mm2/s (cSt).
– FZG test A /8,3/90 to DIN 51354, p. 2:
Min. breakdown load stage 12.
Recommended brands are e.g.:
• AGIP
– Blasia 220
• ARAL
– Degol BG 220
• AVIA
– Gear RSX 220
• BP
– Enersyn HTX 220
• CASTROL
– Alphasyn T 220, Aplha ZN 220
• DEA
– Trion EP 220, Intor HCLP 220
• ELF
– Reductelf SP 220, Elf Epona Z 220
• FINA
– Giran L 220
• FUCHS
– Renolin AWD 220
• KLÜBER
– Lamora 220
• KUWAIT
– Q8 Goya 220, El Greco 220
• MOBIL
– Mobilgear 630, SHC 220
• PANOLIN
– EP Gear Synth 220
• TEXACO
– Syngear 220
• TOTAL
– Varter EP 220
9.13 GREASE
The grease must be NLGI EP 2 Type. Grease
containing Molybdenum additives in NOT
recommented.
9.14 ADDING HYDRAULIC FLUID
Adding hydraulic oil:
• open the oil addition plug in the top of the
return filter (refer to 3.11)
• add oil through the return filter in order to
prevent impurities from entering the hydraulic
system
• the correct hydraulic oil level is in the middle
of the upper sight glass
NOTE:
The unit must be in operating and
horizontal position when the hydraulic oil level
inspection is carried out.
https://tractormanualz.com/