2-4
INSTRUCTION MANUAL
2-00-B
05/95
CHAPTER 2 - SAFETY
on the Crusher.
2. 2Provide each maintenance man with his
own personal padlock and ONE key.
2.11 CLOTHING - SAFE PRACTICE
1. KEEP HANDS AND CLOTHING AWAY
FROM MOVING PARTS. Do not take
chances by wearing loose sleeves, floppy
ties, watches and rings.
2. WEAR EYE PROTECTION when handling
fuel, cleaning fluid, oil or brake fluid.
THESE MATERIALS CAN DAMAGE
YOUR EYES.
3. WEAR A RESPIRATOR when required.
4. WEAR SAFETY GLASSES when drilling,
grinding or hammering metal.
5. KEEP YOUR POCKETS FREE of objects
which can fall out and into machinery.
6. WEAR HARD HAT AND SAFETY
SHOES, when required.
7. WEAR GLOVES to protect your hands
when changing cables.
8. WEAR SAFETY GLASSES AND
PROTECTIVE CLOTHING when using
high pressure air.
9. WEAR GOGGLES AND PROTECTIVE
CLOTHING when handling molten metals;
zinc, babbitt, lead, etc.
10. WEAR EAR PROTECTIVE DEVICES
when required or REDUCE exposure time
as required.
2.12 ALCOHOLIC BEVERAGES AND
MEDICATION
1. DO NOT use alcoholic beverages before
coming to work or while on the job.
2. BEWARE of medicines, tranquilizers or
other drugs which can make you sleepy or
less alert.
2.13 WORK AREA
1. PROMOTE GOOD HOUSEKEEPING,
keep the floor clean and dry, free of debris
and tools. Oily and wet floors, steps and
hand rails are slippery. In winter watch out
for ice and snow. Wet spots, especially near
electrical equipment, are dangerous.
2. DO NOT let material lay and build up on or
around the Crusher.
3. 3STORE dangerous fluids in a suitable place
- away from unauthorized personnel.
ALLOW NO SMOKING IN THE AREA!
4. NEVER start a diesel or gasoline engine
within an enclosed area unless there is
adequate ventilation. Exhaust fumes can
kill!
2.14 EQUIPMENT
1. Use the proper tools; handle tools and heavy
parts sensibly.
2. Keep all tools and equipment free of dirt, oil
and grease. Do not drop or toss them.
3. Use hoisting equipment for heavy lifting.
Save your back.
4. Lower parts, do not drop them.
5. To prevent slipping, wipe hand levers and
knobs clean of oil or grease.
6. Do not use sheaves with cracked rims or
spokes.
7. Check for missing, cracked or frayed
V-belts.
8. Check for broken, defective or missing parts
and replace them. Keep equipment clean and
free of dirt and oil so you can spot loose or
defective parts.
9. When using cables to move a load, be sure
cables are of adequate size and replace any
worn, badly frayed, broken or kinked ones.
Check end connections for wear.
2.15 FIRE HAZARDS
1. DO NOT smoke while refueling - or when
handling fuel containers.
2. SHUT OFF engine when refueling - and use
extra caution if engine is hot.
3. WHEN pouring fuel into the tank, ground
the funnel or spout against the filler neck to
avoid static electric spark.
4. DO NOT use gasoline or diesel fuel for
cleaning parts. Good commercial,
non-flammable solvents are preferred.
https://tractormanualz.com/
Summary of Contents for NORDBERG LT105
