5-2
NORDBERG LT105/105S INSTRUCTION MANUAL
5-38-B
02/02
CHAPTER 5 - STARTING AND STOPPING
Ensure that the machine is operated only in safe
manner and when in good mechanical condition.
Ensure that the machine is standing properly and
will not overturn.
The operation of the machine must only be
allowed, when all necessary protective and safety
devices, e.g. guards, emergency stop devices,
silencers, aspirators etc. are in place and in
operating condition.
Before starting the machine, ensure that there are
no persons in the area whose safety may be
endangered! Walk around the machine and ensure
that there is nobody on, by or below the machine.
Warn everybody in the vicinity before starting.
5.2 STARTING THE DIESEL ENGINE
Start the diesel engine as follows:
4. Turn the key switch in the main control
panel to ignition ON-position (ref. 4.1).
5. Wait until the unit centre display is visible.
Reset possible display messages with F1
function key.
6. Turn the key switch to START position and
hold it that way until the engine is running.
NOTE:
Hold the key switch at start position until
the diesel engine starts.
NOTE:
If you use manual control, be especially
careful. The fact is that manually activated device
will not run until the diesel engine is running. But
the device will start to operate immediately when
the engine is started, if the manual control is on.
5.3 STOPPING THE DIESEL ENGINE
Stop the diesel engine by turning the key switch to
"OFF" position.
NOTE:
Before stopping the diesel engine, make
sure that the engine idles for few minutes.
5.4 ADJUSTING DIESEL ENGINE RPM
SPEED
The automatic control of the machine monitors and
adjusts the diesel engine RPM during the start and
the crushing process. During this time, the user
cannot adjust the RPM speed. When the process is
not running, the RPM speed of the diesel engine
can be controlled with the RPM control switch
located in the drive control box. If the machine has
radio control (optional), the RPM speed of the
diesel engine can be adjusted with radio control in
the same way as with the drive control box.
https://tractormanualz.com/
Summary of Contents for NORDBERG LT105
