02/02
7-28-B
NORDBERG LT105/105S INSTRUCTION MANUAL
7-15
CHAPTER 7 - CRUSHING
7.10 RECYCLING
In carrying out recycling processes with the
crusher, all metal objects should be removed from
the feed before they enter the crusher.
Someone should stand next to the feeder and
remove the metal pieces. Be very careful when
touching the feed material. The feeder must be
stopped when removing larger objects. Never climb
on top of the feeder.
The most efficient method is to prepare the feed
material for the process and remove all the metal
pieces from it before loading it to the LT105.
The optional magnetic separator can be used for the
removal of small metal objects. The maximum
diameter allowance for steel objects entering the
crusher is 20 mm. The maximum length allowance
is 0,5m.
Figure 7.10.1 Removal of metal objects during
the crushing of recyclable materials.
7.11 OPTIONAL EQUIPMENT
LEVEL INDICATOR
The purpose of the level indicator is to control the
feed material level that enters the crusher. The
indicator stops the feed process and emits a light
signal when the material level is too high. The
indicator resets itself automatically.
Keep the level indicator clean to ensure that it
functions proper function.
Refer to the IC500 Instruction Manual for further
information on switching the level indicator to ON
or OFF position.
HYDRAULIC OUTPUT
The hydraulic output can be set ON/OFF
permanently or ON with the process. Refer to the
IC500 Instruction Manual for further information
on how to select the hydraulic output.
INTERMEDIATE CABLE FOR SECONDARY
UNIT
The LT105 unit is equipped with a 6-pin socket
allowing information flow between the primary and
the secondary unit. The socket has three different
functions:
Pins 1&2: When connected, LT105 gets
information on the connection of the secondary
unit..
Pins 3&4: Feeder ON/OFF information (secondary
feed/emergency functions can be connected to this).
Normally open contact required.
Pins 5&6: For the level sensor of the secondary
unit. Normally closed contact required.
https://tractormanualz.com/
Summary of Contents for NORDBERG LT105
