USER MANUAL
SOLDERABILITY TESTER
METRONELEC
V2.0
–
10/2021
6 Avenue Eiffel - 78420 Carrières-sur-Seine
Tél : 01 30 15 20 00
Web :
http://www.metronelec.com| Mail : [email protected]
Page
26
sur
83
We use generally 1 or 2 mm/s for reflow (static) and 20 to 25 mm/s for wave (dynamic).
WITHDRAWING SPEED
This value is only useful for dip and look test as there is no influence during the
measurement. Input the withdrawing speed in mm (1 to 50) or use the mouse on the arrows
to change the value.
SURFACE TENSION (GammaLV)
Input the GammaLV in mN/m or use the mouse on the arrows to change the value(1 to
1000).
LIBRARIES
It is possible to save all parameters selected in the "Sample library" by clicking on
Add in library. Operator can also delete from library.
The flux surface tension is saved or deleted in the "Flux library.
The temperature and the density are saved or deleted in the "Alloy library"
Measuring solderability of component / PCB
Components model choice
For “classical” components, use the list of type in section 4 and 5, operator will find an
answer to the majority of needs.