Metrologic MS2020 Stratos, Service Manual

Page: 79 / 102

71
©2004 Metrologic Instruments, Inc. All rights reserved MS2020 Stratos Service Manual
STRATOS SYSTEM AVAILABLE CONFIGURATION / SET-UP
EAS Deactivation Set-Up
SW1 and SW2 are the switch banks inside the CheckPoint Device that set the deactivation
range. The following is a list of CheckPoint recommended switch bank settings.
Base Model
CheckPoint Recommended Switch Bank
Settings
MS2020 SW1 & SW2 switches 1 and 6 set to ON
MS2021 SW1 & SW2 switches 1 and 6 set to ON
MS2022 SW1 & SW2 switches 1 and 6 set to ON
All models have a connector ( marked EAS In ) on the bottom of the scanner/scale. Metrologic
provides an EAS cable (
MLPN
52-52511A) for connection between the scanner/scale and the
Checkpoint Device.
EAS Cable Connection (Bottom of Stratos)
The following figure shows the location of the EAS deactivation area for Stratos. It is important
to pass the entire tag through this area to deactivate the security tag.
EAS Deactivation Area