Metrologic MS2020 Stratos, Service Manual

Page: 37 / 102

29
©2004 Metrologic Instruments, Inc. All rights reserved MS2020 Stratos Service Manual
SERVICING AND MAINTENANCE PROCEDURES
OPENING & ACCESSING SCANNER MODULES
Platter Removal
1. Remove Platter by gently grasping
platter on the left & right sides, and
carefully lifting straight up.
2. Refer to the picture and diagrams
shown on this page.
No Special tools are required to complete
Removal from Counter
1. Raise lifting hooks as shown in picture
and figures.
2. Press your thumbs against vertical
window and place one or two fingers
underneath each lifting hook.
3. Carefully lift unit directly up out of
counter and take care not to
pull/damage attached cables or
connections.
Refer to the picture and diagrams shown on this page.
No Special tools are required to complete this step.
Remove
Platter
Lifting
Hooks