Metrologic MS2020 Stratos, Service Manual

Page: 9 / 102

1
©2004 Metrologic Instruments, Inc. All rights reserved MS2020 Stratos Service Manual
PRELIMINARY INFORMATION
INFORMATION & SAFETY
NOTICE
This equipment has been tested and found to comply with limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the interference
at his own expense. Any unauthorized changes or modifications to this equipment could void
the users authority to operate this device. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may
cause undesired operation.
NOTICE
This Class A digital apparatus complies with Canadian ICES-003.
Remarque
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Caution
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous laser light exposure. Under no circumstances should the customer
attempt to service the laser scanner. Never attempt to look at the laser beam, even if the
scanner appears to be nonfunctional. Never open the scanner in an attempt to look into the
device. Doing so could result in hazardous laser light exposure. The use of optical instruments
with the laser equipment will increase eye hazard.
Atención
La modificación de los procedimientos, o la utilización de controles o ajustes distintos de los
especificados aquí, pueden provocar una luz de láser peligrosa. Bajo ninguna circunstancia el
usuario deberá realizar el mantenimiento del láser del escáner. Ni intentar mirar al haz del láser
incluso cuando este no esté operativo. Tampoco deberá abrir el escáner para examinar el
aparato. El hacerlo puede conllevar una exposición peligrosa a la luz de láser. El uso de
instrumentos ópticos con el equipo láser puede incrementar el riesgo para la vista.