manualshive.com logo in svg

Metrohm 2.947.0010, Manual

Share
Download
Metrohm 2.947.0010 Manual Download Page 52

6.1 Care

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

44

￭￭￭￭￭￭￭￭

947 Professional UV/VIS Detector Vario (2.947.00x0)

6  Operation and maintenance

6.1 

Care

The instrument requires appropriate care. Excess contamination of the
instrument may result in functional disruptions and a reduction in the ser-
vice life of the sturdy mechanics and electronics.

Clean the instrument immediately if chemicals or solvents are spilled on it.
The plug connections (particularly the power plug) absolutely must be pro-
tected against contamination.

CAUTION

Inward seepage of liquid

Instrument damage through inward seepage of liquid!

￭

The instrument has been designed so that liquid is largely prevented
from being able to get inside the instrument. However, unplug the
power plug immediately if you suspect that corrosive media have
gotten inside the instrument. This is the only way to prevent extreme
damage to the instrument electronics. Contact Metrohm Service
immediately.

WARNING

Only trained personnel may open the instrument's housing.

6.2 

Maintenance by Metrohm Service

Maintenance of the instrument is best carried out as part of annual ser-
vice, which is performed by specialist personnel from Metrohm. A shorter
maintenance interval is recommended if you frequently work with caustic
and corrosive chemicals. Metrohm Service offers every form of technical
advice for maintenance and service of all Metrohm instruments.

Summary of Contents for 2.947.0010








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands