Metro Therm SHK 200S, Installation And Operating Manual

Page: 59 / 80

59 SHK 200S
SHK 200S-6
Emptying the hot water tank
Emptying the heating system
For emptying the hot water tank the siphon principle
applies. This can be done via the drain valve on the
cold water supply pipe or by placing a hose in the cold
water connection.
To facilitate the servicing of the heating system, it
must first be emptied using the filling valve.
IMPORTANT
When emptying the side of the heating medium / heat-
ing system, remember that they may contain hot wa-
ter. There is a risk of burns.
1. Connect the hose to the external drain valve of
the system.
2. Then open the drain valve to empty the heating
system.
Chapter 10 | Service