Metro Therm SHK 200S, Installation And Operating Manual

Page: 40 / 80

40 SHK 200S
SHK 200S-6
Settings for the user
Menu 1 - Indoor climate
Menu 1.1 - temperature
The menu CLIMATE OF ROOMS is used to modulate
the settings for the heating system. There are several
submenus in this. Status information for the relevant
menu can be found on the display to the right of the
menus.
In this menu you can set the temperature for the heat-
ing system. Status information gives setpoints for the
heating system.
Choose between heating or cooling and then set the
desired temperature in the next menu "temperature
heating/ cooling" in menu 1.1. More information after
selecting "?".
Set the temperature (without rooms ensors installed
and activated):
Setting range: -10 do +10
Factory setting: 0
In this menu, you can select the operating mode for the
SHK 200S / SHK 200S-6 unit. More information after
selecting "?".
Factory setting: auto
In this menu it is possible to activate alarm actions.
More information after selecting "
?".
Factory setting:
decrease room temp: active
deactivate hot water: aktywne
Reminder to complete the checklist in the first chapter
of the user manual.
In this menu, we can decide whether the start guide
will run again the next time the system is started.
15/18 Op mode
16/18 Alarm actions
17/18 Reminder
18/18 Start guide
CAUTION
Recommended "auto" operating mode. Editing is only
possible by qualified personnel.
Chapter 9 | Control