Metro Therm SHK 200S, Installation And Operating Manual

Page: 57 / 80

57 SHK 200S
SHK 200S-6
IMPORTANT
For the following functions to work the USB memory
must contain fi les with software for the controller.
IMPORTANT
A software update does not reset the menu
settings in the controller.
IMPORTANT
If the update is interrupted before it is complete (for ex-
ample power cut etc.), the software can be reset to the
previous version if the OK button is held in during start up
until the green lamp starts to illuminate (takes about 10
seconds).
USB service outlet
Chapter 10 | Service
The display unit is equipped with a USB socket that
can be used to update the software, save logged in-
formation and manage the settings in the controller.
The fact box at the top of the display shows informa-
tion (always in English) of the most probable update
that the update software has selected form the USB
memory.
This information states which product the software is
intended for, the software version and general infor-
mation about them. If you wish to select another fi le
than the one selected, the correct fi le can be selected
by "choose another fi le".
start updating
Select “start updating" if you want to start the update.
You are asked whether you really want to update the
software. Respond "yes" to continue or "no" to undo.
If you responded"yes" to the previous question the
update starts and you can now follow the progress of
the update on the display. When the update is com-
plete the controller restarts.
This allows you to update the software in the controller.
When a USB memory is connected a new menu
(menu 7) appears in the display
Menu 7.1 - update fi rmware