MI 3205 TeraOhm XA 5kV
Instrument description
20
3.4.5 Measurement result line
R
Shows Insulation resistance. During measurement campaign this
result is refreshed every few seconds. When the measurement is
completed it represents Insulation resistance at cursor position.
U
Shows the output voltage. During measurement campaign this
result is refreshed every few seconds. When the measurement is
completed it represents output voltage at cursor position.
t
Shows test time (mm:ss). When the measurement is completed
it represents time at cursor position.
Note:
Averaging in measurement result line is disabled during measurement campaign
in all functions regardless of settings.
3.4.6 Graphical presentation of measured data
Figure 3.8: Graph screen
Measured or averaged Insulation resistance values in relation to time of measurement
are represented in this two dimensional R/t diagram. Online plotting, during
measurement, can also be observed. When the measurement is completed cursor is
attached to the graph for detail analysis.
3.4.7 Backlight operation
After turning the instrument ON the LCD backlight is automatically turned ON. It can be
turned OFF and ON by simply clicking the
☼
(LIGHT)
key.
Note:
If you press and hold the Light (
☼
) key for approximately 5 s the instrument will
RESET!
