MI 3205 TeraOhm XA 5kV
Instrument description
15
3.3 Accessories
The accessories consist of standard and optional accessories. Optional accessories can
be delivered upon request. See
attached
list for standard configuration and options or
contact your distributor or see the METREL home page: http://www.metrel.si.
3.3.1 Test leads
The standard length of high voltage shielded test lead with tip is 2 m. The standard
length of high voltage shielded test leads with (red, black) banana connectors is 3 m;
optional lengths are 8 m and 15 m. For more details see attached list for standard
configuration and options or contact your distributor or see the METREL home page:
http://www.metrel.si
.
All test leads are made of high voltage shielded cable, because shielded cable provides
higher accuracy and immunity to disturbance of measurements that can occur in
industrial environments.
High voltage shielded test leads with High voltage alligator clips.
Application notes:
This test leads are designed for diagnostic
testing of insulation. They can also be used
for hand held testing with test voltages up to
5 kV d.c..
Insulation ratings:
High voltage banana connectors (red,
black): 5 kV d.c. (reinforced insulation);
Alligator clips (red, black): 5 kV d.c.
(reinforced insulation);
Guard banana connector (green): 600
V CAT IV (reinforced insulation);
Cable (yellow): 12 kV (shielded).
Figure 3.2: HV test leads with alligator clips
Guard test lead with alligator clips
Insulation ratings:
Guard test lead with banana
connectors (green): 600 V CAT IV
(reinforced insulation);
Alligator clip (green): 600 V CAT IV
(reinforced insulation)
Figure 3.3: Guard lead with alligator clip
