MI 3100 s, MI 3100 SE
Eurotest
EASI
Data handling
69
7.6.2 Bluetooth communication
How to configure a Bluetooth link between instrument and PC
For Bluetooth communication with PC a Standard Serial Port over Bluetooth link for Bluetooth
dongle A 1436 must be configured first.
Switch Off and On the instrument.
Be sure that the Bluetooth dongle A1436 is properly initialized. If not the Bluetooth
dongle must be initialized as described in chapter 4.3.7 Communication (MI 3100 SE
only).
On PC configure a Standard Serial Port to enable communication over Bluetooth link
between instrument and PC. Usually no code for pairing the devices is needed.
Run the
EurolinkPRO
program
.
The PC and the instrument will automatically recognize each other.
The instrument is prepared to communicate with the PC.
How to configure a Bluetooth link between instrument and Android device
Switch Off and On the instrument.
Be sure that the Bluetooth dongle A1436 is properly initialized. If not the Bluetooth
dongle must be initialized as described in chapter 4.3.7 Communication (MI 3100 SE
only).
Some Android applications automatically carry out the setup of a Bluetooth connection. It
is preferred to use this option if it exists.
This option is supported by Metrel's Android applications.
If this option is not supported by the selected Android application then configure a
Bluetooth
link via Android device’s Bluetooth configuration tool. Usually no code for
pairing the devices is needed.
The instrument and Android device are ready to communicate.
Notes
:
Sometimes there will be a demand from the PC or Android device to enter the code.
Enter code ‘NNNN’ to correctly configure the Bluetooth link.
The name of correctly configured Bluetooth device must consist of the instrument type
plus serial number, eg.
MI 3100SE-12240429D
. If the Bluetooth dongle got another
name, the configuration must be repeated.
