METREL MI 3100 S EurotestEASI, Instruction Manual

Page: 27 / 91

MI 3100 s, MI 3100 SE Eurotest EASI Measurements
27
The Bluetooth dongle A1436 should be initialized when it is used with the instrument for the first
time. During initialization the instrument sets the dongle parameters and name in order to
communicate properly with PC and other devices via Bluetooth.
Initialization procedure

Connect Bluetooth dongle A1436 to the instrument.

Press RESET key on the Bluetooth dongle A1436 for at least 10 seconds.

Select INIT. BT DONGLE in Communication menu and press the TEST key .

Wait for confirmation message and beep. Following message is displayed if dongle was
initialized properly: EXTERNAL BT DONGLE SEARCHING OK!
Notes:

The Bluetooth dongle A1436 should always be initialized before first use with the
instrument.

If the dongle was initialized by another Metrel instrument it will probably not work
properly when working with the instrument again.

For more information about communication via Bluetooth refer to chapter 7.6
Communication and A1436 manual.
Selection of barcode scanner type
In this menu the barcode scanner type can be set. Options are:

serial barcode scanner and

barcode scanner application on Android devices.
Keys:
UP / DOWN Selects option.
TEST Confirms selected option.
ESC Exits back to Communication menu.
Function selector
switch Exits back to selected test / measurement function
without changes.
Figure 4.11: Menu for scanner type