background image

19.01.2015

Metos Induction range Dominator

6

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 4 

Zone will not Operate

 

Ø110mm pan 

- If inner circle markings can be seen, 

pan is too small. Detection will prevent cooking using 
this size of pan.

 

 

 

 

Figure 5 

Zone will Operate

 

Ø120mm pan 

- Ideal, positioned centrally. 

Inner circle markings cannot be seen.

 

Note

:  Positioning  lines  are  available  for  central 

positioning of pan.

 

 

 

Figure 6 

Zone will not Operate

 

Ø120mm  pan 

-  Ideal  but  positioned  incorrectly. 

Only half the pan contents will cook as outer circle 
markings have been compromised.

 

 

 



 

Figure 7 

Zone will Operate however:

 

Ø180mm  pan 

-  Ideal  for  cooking. Although  pot  is 

positioned  incorrectly,  whole  pan  area  will  cook. 
Outer circle markings have not been compromised. 

(THIS IS NOT RECOMMENDED PRACTICE)

 

 

 

Figure 8 

Zone will Operate

 

Ø270mm  pan 

-  Ideal  for  cooking,  positioned 

centrally.

 

Note

: Positioning lines available to centralise pot.

 

 

 

 

Figure 9 

Zone will Operate - however:

 

Ø270mm  pan 

-  Ideal  for  cooking  but  positioned 

incorrectly.  Only  three-quarters  of  pan  will  cook  as 
outer circle markings have been compromised.

 

 

 

 

 

 

 

 

 

 

Important 

Note:

 

Using pans 

of less than 

Ø270mm 

will reduce 

the power 

output of 

the coils.

 

Figure 4  

Zone will not Operate

Ø110mm pan - If inner circle markings can be seen, pan is too 

small. Detection will prevent cooking using this size of pan.

Figure 5  

Zone will Operate

Ø120mm pan - Ideal, positioned centrally. Inner circle markings 

cannot be seen.

Note: Positioning lines are available for central positioning of 

pan.

Figure 6  

Zone will not Operate

Ø120mm pan - Ideal but positioned incorrectly. Only half the 

pan contents will cook as outer circle markings have been 

compromised.

Figure 7  

Zone will Operate however

Ø180mm pan - Ideal for cooking. Although pot is positioned in-

correctly, whole pan area will cook. Outer circle markings have 

not been compromised. 

THIS IS NOT RECOMMENDED PRACTICE

Figure 8  

Zone will Operate

Ø270mm pan - Ideal for cooking, positioned centrally.

Note: Positioning lines available to centralise pot.

Figure 9  

Zone will Operate - however

Ø270mm pan - Ideal for cooking but positioned incorrectly. Only 

three-quarters of pan will cook as outer circle markings have 

been compromised.

Important Note:

Using pans of less than Ø270mm will reduce the power output of the coils.

Summary of Contents for METOS DOMINATOR Plus



















Reviews: