background image

19.01.2015

Metos Induction range Dominator

3

1.  General description

2.  Safety and Operation

IF GLASS-CERAMIC TOP IS CRACKED OR BROKEN, IMMEDIATELY DISCONNECT APPLIANCE FROM 

POWER SUPPLY AND CONTACT YOUR SERVICE AGENT.

WARNING - PERSONS WITH PACEMAKERS SHOULD CONSULT THEIR G.P. BEFORE OPERATING THIS 

APPLIANCE. THIS UNIT OPERATES AT 18 - 22 KHz AND THIS MAY AFFECT OLDER TYPES OF PACE-

MAKER.

The air intake filter MUST be in position during operation and MUST be cleaned regularly.

DO NOT obstruct air filter entry below front of appliance or flue exit at top/ rear.

This unit must be installed by a suitably qualified person. 

A mains input connecting cable is not supplied with unit. A suitable cable should be provided by the 

installer, conforming to at least 6 mm², type H07RN-F.

Use of proper pan type is essential for correct induction hob operation (Refer to Section 3).

2

 

 

 

 

SECTION 1 - GENERAL DESCRIPTION

 

4 x 5kW, individually controlled, marked cooking zones 
on  a  glass-ceramic  cooktop.  Mounted  upon  6.4kW 
twin-fan convection oven with 5 shelf positions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 1

 

SECTION 2 - SAFETY and OPERATION

 

WARNING 

-  IF GLASS-CERAMIC TOP IS  CRACKED 

OR 

BROKEN, 

IMMEDIATELY 

DISCONNECT 

APPLIANCE FROM POWER SUPPLY AND CONTACT 
YOUR SERVICE AGENT.

 

WARNING - PERSONS WITH PACEMAKERS SHOULD 

CONSULT  THEIR  G.P.  BEFORE  OPERATING  THIS 

APPLIANCE.  THIS  UNIT  OPERATES AT  18  -  22KHz 

AND  THIS  MAY  AFFECT  OLDER  TYPES  OF 

PACEMAKER.

 

The  air  intake  filter  MUST  be  in  position  during 
operation and MUST be cleaned regularly.

 

DO  NOT  obstruct  air  filter  entry  below  front  of 
appliance or flue exit at top/ rear.

 

This unit must be installed by a suitably qualified person. 
A mains  input  connecting  cable 

is  not  supplied  with 

unit

. A suitable cable should be provided by the installer, 

conforming to at least 6mm², type H07RN-F.

 

Use  of  proper  pan  type  is  essential  for  correct 
induction hob operation 

(Refer to Section 3)

.

 

Do  not  place  any  metal  objects,  such  as  kitchen 
utensils,  cutlery,  aluminium  foil  or  plastic  vessels 
upon the glass-ceramic hob.

 

Items  such  as  rings,  watches,  bracelets,  etc.  worn  by 
the user  could  become  hot  when in  close  proximity  to 
cooking  zone.  Do  not  place  credit  cards,  etc.  on 
glass-ceramic top as data could be wiped.

 

Never leave induction hob unsupervised when in use. 
The glass-ceramic top must NOT be used for storage. 
Do not place cloths etc. over appliance rear. This may 
impede flue outlet and cause overheating of appliance.

 

 

SECTION 3 - OPERATION

 

INDUCTION HOB

 

Use of correct pan type is essential for proper operation.

 

Suitable  pans  are  those  made  with  ferrous  materials, 
ie, ferrous stainless steel, steel. Use a magnet to check, 
if magnet sticks to base, the pan should be OK to use.

 

Warning 

 

this only tests function 

 not quality!

 

Poor quality will reduce efficiency and performance.

 

Always  place  pans  centrally  upon  cooking  zone  for 
optimum performance and safety.

 

Optimum pan diameter is 

270mm

. Do not use pans of 

less than 

120mm 

diameter.

 

If  a  pan  base  is  damaged  or  warped,  ie  concave  or 
convex,  discontinue use  as  this  will  seriously  affect 
performance.

 

Summary of Contents for METOS DOMINATOR Plus



















Reviews: