Metallkraft 4001015, Operating Instructions Manual

Page: 27 / 36

Spare parts
WPP Series | Version 1.02 27
11 Spare parts
11.1 Spare parts orders
Spare parts are available from authorized retailers or directly from the manu-
facturer. The contact details have been listed in section 1.2 Customer service.
The following key data is required for queries or spare parts orders:
- Device type
- Item number
- Spare parts drawing number
- Position number
- Year of manufacture
- Quantity
- Desired shipping type (post, freight, sea, air, express)
- Shipping address
Spare parts orders without the aforementioned data cannot be taken into ac-
count. The supplier shall determine the shipping type if no relevant data was
provided.
Data on the machine type, item number and year of manufacture is listed on
the type plate attached to the workshop press.
Example
The pump lever for the workshop press WPP 15 must be ordered. The pump
lever is shown in the spare part drawing 2 with the item number R0188.
Device type: workshop press WPP 15
Item number: 4001015
Spare parts drawing number: 2
Position number: R0188
Order number:
0-4001015-2-R0188
The order number is made up of the item number (4001015), spare parts
drawing number (2), position number (R0188) and one digit of the item num-
ber (0).
-The item number must feature a leading 0 (zero).
- Position numbers 1 to 9 shall also feature a leading zero.
The article number of your device:
Workshop press:
WPP 15
4001015
WPP 20 4001020
WPP 30 4001030
GEFAHR!
Risk of injury caused by the use of incorrect spare parts!
The use of incorrect or faulty spare parts may cause risks
for operating staff and damage as well as malfunctions.
- Exclusively genuine spare parts made by the manufacturer or
spare parts authorized by the manufacturer shall be used.
- Always contact the manufacturer if you are unsure.